Page 1 of 1
Where are my output files going?
Posted:
Mon Feb 24, 2020 7:30 pmby dtours
Win 7,SNS-HDR v2.4.2
When I try to batch create Bracketed files with this version, it appears that SNS-HDR is generating new HDR(#) jpeg files, BUT, I can not seem to locate the output??
I've been working on this since V2xx was released. I'm running the preliminary install on my backup machine only.
All the 'preferences' and output info settings seem to be correct. Found no help from the forum.
I am still running v1.4.22 w/Win10 on my 'primary' machine and it works GREAT.....no problems.
Is there a Win7 .log file generated by SNS-HDR ? I have not located that either.
Any assistance is welcomed!!
Thanks.
Re: Where are my output files going?
Posted:
Thu Feb 27, 2020 8:14 pmby Sebastian Nibisz
Please show a screenshot of the batch processing window.
Re: Where are my output files going?
Posted:
Fri Mar 06, 2020 8:19 pmby dtours
- large
- SNS_Screen+OutputFolder.jpg (505.83 KiB) Viewed 24277 times
- large
- SNS_Screen+OutputFolder.jpg (505.83 KiB) Viewed 24277 times
Thanks for the response!
Screenshot is attached as requested.
I believe all my inputs & outputs are accurate (but I could be wrong!)
SNS End of batch shows 0 errors, 1 output file created.
I have also File Searched my entire system's disk drives for the output filename with 'no files found' ?
Re: Where are my output files going?
Posted:
Sun Mar 08, 2020 12:46 pmby dtours
My selections for batch output 'seem' to be correct.
Processed 9 NEF files with 'files generated 0, erros 9' (screen shot attached)
Is there a LOG file generated? Where should it be located?
(these tests are being run on W7 test system prior to installation on W10 'work' system.
Re: Where are my output files going?
Posted:
Wed Apr 01, 2020 11:20 amby Sebastian Nibisz
This image is too small. The destination directory is defined in the "Destination" group in the "Another location" field.
Re: Where are my output files going?
Posted:
Wed Apr 08, 2020 3:41 pmby dtours
Sebastian, Thank You for the reply.
Been using computers since 1976...not an IT expert, but this has me baffled......
V1.4.22 has no output problem.
Larger screen shots attached:
- Destination Dir, After Batch mode completed = empty
- SNS-v24_Output_Result copy.jpg (353.83 KiB) Viewed 22100 times
- V2.4 Batch mode output screen
- SNS-v24_Batch_Screen copy.jpg (300.18 KiB) Viewed 22100 times
Re: Where are my output files going?
Posted:
Thu Apr 09, 2020 6:01 pmby dtours
Sebastian!
Installed V2.4.3 on Win10 work system. Runs successfully, Very Happy !
My only problem was on Win7 Test system, where it Failed to create OutPut files under all varied attempts.
No Longer a problem to me.
SNS-HDR is The BEST at what it does....Thank You!!