360° Panorama Option Not Working

Need help with image processing? Post here!
Potrzebujesz pomocy w obróbce obrazu? Pisz tutaj!

Re: 360° Panorama Option Not Working

Postby RaduMihai » Sat Mar 25, 2017 7:29 pm

Version 2.2. is ON?
RaduMihai
 
Posts: 21
Joined: Fri Mar 17, 2017 4:17 pm

Re: 360° Panorama Option Not Working

Postby Sebastian Nibisz » Sat Mar 25, 2017 7:48 pm

Is ready to release, but I'm waiting for one translation file.
Should be released on Monday.
User avatar
Sebastian Nibisz
Site Admin
 
Posts: 968
Joined: Tue Sep 13, 2011 8:51 am

Re: 360° Panorama Option Not Working

Postby RaduMihai » Sun Mar 26, 2017 10:30 am

..Good news!
Thank you!
RaduMihai
 
Posts: 21
Joined: Fri Mar 17, 2017 4:17 pm

Re: 360° Panorama Option Not Working

Postby Sebastian Nibisz » Mon Mar 27, 2017 5:24 pm

The update is already available.
User avatar
Sebastian Nibisz
Site Admin
 
Posts: 968
Joined: Tue Sep 13, 2011 8:51 am

Re: 360° Panorama Option Not Working

Postby Hakon » Fri Sep 29, 2017 7:18 pm

I have correctly understood that the 360 ​​° option is only effective with equirectangularen pictures? Not for the pictures, which still have to be put together?
Because in my workflow I first create the HDR images from the images and then stitche the HDR images. For this I deactivate the align and activate the 360 ​​° option.
So far I can not complain about the results ...
Hakon
 
Posts: 20
Joined: Sat Sep 29, 2012 4:18 pm

Re: 360° Panorama Option Not Working

Postby Sebastian Nibisz » Fri Sep 29, 2017 7:28 pm

The 360° option is for a stitched panorama, not for component images.
User avatar
Sebastian Nibisz
Site Admin
 
Posts: 968
Joined: Tue Sep 13, 2011 8:51 am

Re: 360° Panorama Option Not Working

Postby Hakon » Fri Sep 29, 2017 7:57 pm

I uses this Option over years for the single images ;-) Never had any issue. But now i know better. More important for my workflow is the unchecking of the alignment-option i believe.
Hakon
 
Posts: 20
Joined: Sat Sep 29, 2012 4:18 pm

Previous

Return to Help with processing / Pomoc w obróbce

Who is online

Users browsing this forum: No registered users and 5 guests

cron