Problem on image

Need help with image processing? Post here!
Potrzebujesz pomocy w obróbce obrazu? Pisz tutaj!

Problem on image

Postby Franco50 » Mon May 29, 2017 8:11 am

i am trying a copy of your software, but how can be seen, this is the result after having treated a single photo on sns-HDR, what happened at the sky? Thanks
Attachments
_MG_1383-HDR.jpg
_MG_1383-HDR.jpg (161.02 KiB) Viewed 13917 times
Franco50
 
Posts: 4
Joined: Sat May 27, 2017 4:56 pm

Re: Problem on image

Postby Raiko » Sat Jun 03, 2017 3:23 pm

Hi Franco50,

could you please share the source images?

Raiko
Raiko
 
Posts: 69
Joined: Wed Sep 14, 2011 3:19 pm
Location: Germany

Re: Problem on image

Postby Franco50 » Sun Jun 04, 2017 7:17 am

Sorry, i don't understand what you want. May be the raw file?
Franco50
 
Posts: 4
Joined: Sat May 27, 2017 4:56 pm

Re: Problem on image

Postby Raiko » Mon Jun 05, 2017 11:41 am

If you can upload the raw file, we can try to check what is the reason of your strange sky.
Only to see your SNS-HDR Results, it is difficult find the reason.
Raiko
 
Posts: 69
Joined: Wed Sep 14, 2011 3:19 pm
Location: Germany

Re: Problem on image

Postby Franco50 » Wed Jun 07, 2017 6:26 pm

This is the RAW file
Attachments
_MG_1383.CR2
(26.41 MiB) Downloaded 987 times
Franco50
 
Posts: 4
Joined: Sat May 27, 2017 4:56 pm

Re: Problem on image

Postby Raiko » Thu Jun 08, 2017 4:59 pm

Hi, i use you RAW Image with the Night Preset.
And adjust this Profile a litle bit, and don't see any strange sky like you upload.

Image
Raiko
 
Posts: 69
Joined: Wed Sep 14, 2011 3:19 pm
Location: Germany

Re: Problem on image

Postby den » Fri Jun 09, 2017 2:59 pm

...
Noticed the following regarding your RAW file data:
...ISO = 800
...in-Camera Sharpness setting = 5

Using Canon's DPP, the un-edited RAW file image has a 16 to 237 Luminosity range; a Sharpness setting = 5; a Luminance noise reduction setting = 3; and a Chrominance noise reduction setting = 3.

As the image has significant Luminance/Chrominance noise in the sky image areas at this ISO and Sharpness settings and Version 2 of SNS-HDR no longer has a Raw Noise reduction feature... ...perhaps you could develope the image using Canon's DPP settings of:
...Sharpness = 2
...RGB Curve settings = 16 and 237, expands image to full 0 to 255 tone range
...Luminance noise reduction = 7
...Chrominance noise reduction = 4, then
...Convert and 'Save as' to a 16-bit tiff image version.

Use this image version as the Input or Source image for SNS-HDR with a preferred Preset and restore Details and Clarity to a preference with the settings possible on SNS-HDR's Home/Pro Advanced tab...

Like Raiko, a modified Night preset seem favored and I was also unable to produce the sky image area artifacts you illustrated from the RAW file posted...

...den...

Addendum:
Illustrated are Advanced Tab settings to minimize adding Details and Clarity to the image's Cyan to Blue hue range [the sky image areas]. Work Space shown at a 1:1 Zoom.
DetailsClarity_AdvancedTab_SNS-HDR_Pro.jpg
DetailsClarity_AdvancedTab_SNS-HDR_Pro.jpg (81.63 KiB) Viewed 13840 times
den
 
Posts: 100
Joined: Wed Sep 21, 2011 3:20 pm
Location: Birch Bay near Blaine, WA USA

Re: Problem on image

Postby den » Fri Jun 09, 2017 9:00 pm

...
Question...

Does the SNS-HDR Pro Demo version apply a 'weave' texture as well as the program name in its watermark?

If this is the case, you could use SNS-HDR Lite, currently version 2, with a Night preset to convert from RAW and tone-map... ...then use noise reduction if desired from another image editor.

...den...

P.S. I would have downloaded/installed the demo version to see but did not want to overwrite my 'official' version... ...A 'How to' for SNS-HDR Lite is here: http://www.l7.org/IMAGEs_by_DEN/tutorials7/SNS-HDR_Lite_2/SNS-HDR_Lite_2_References_170405.pdf
den
 
Posts: 100
Joined: Wed Sep 21, 2011 3:20 pm
Location: Birch Bay near Blaine, WA USA


Return to Help with processing / Pomoc w obróbce

Who is online

Users browsing this forum: No registered users and 5 guests

cron